Х разводна ременица

H (pitch 12.700) - heavy duty

1. In order to ensure the accuracy of transmission, the manufacturer must improve the manufacturing accuracy of synchronous belt teeth and ensure that the pitch is equal to that of belt teeth.

2. Solve pitch error and accumulated error in manufacturing

3. Appropriate pre tension: the synchronous belt drive shall have appropriate tension. For example, the tension adjustment table is attached in the product manual of FA317A drawing frame, which facilitates the tension adjustment during maintenance and ensures that there is no mechanical wave caused by improper tension

4. The parallelism between the toothed wheel and the toothed wheel must be ensured in manufacturing and installation

5. Solve the machining accuracy of toothed wheel and prevent the vibration of synchronous belt

6. For machinery driven by toothed belt, frequent starting shall be avoided as far as possible to prevent shortening of its service life

7. Clean and maintain the surface of toothed belt and toothed wheel with absolute ethanol regularly to ensure that there is no oil stain

8. Check the tension of toothed belt regularly

9. Find and solve problems in time by combining the spectrum analysis of mechanical wave detection of semi-finished products

A 3D printing H timing pulley includes a main wheel, one side of the main wheel is movably connected with a left wheel ring, the outside of the left wheel ring is penetrated with mounting bolts, the other side of the main wheel is movably connected with a right wheel ring, the outside of the right wheel ring is penetrated with through holes, the inside of the right wheel ring is evenly arranged with rotating beads, the outside of the rotating beads is fixedly provided with a retaining ring, and the outside of the retaining ring is fixedly provided with a baffle, The inner wall of the baffle extends inward and is provided with an installation groove. 

Popularne oznake: